The Sailrite Fabric Calculator

Foam Nesting

Unit of Measurement inches cm

Select the type of foam desired below:

CushionRite High (Premium) and Medium (Standard) Density Polyurethane Foam -- Available in sheets 48 X 80 inches, 26 x 48 inches, and 24 X 80 inches.

CushionRite Dry Fast Foam -- Available in sheets 24 x 80 inches, 48 X 80 inches, and 24 X 48 inches.

CushionRite Closed Cell Foam -- Available in sheets 56 X 84 inches, 56 X 48 inches, and 56 X 24 inches.

Add Cushions
1. Left Side (?)
The left hand length of the cushion to be added.
2 Decimals!
2. Top Side (?)
The top width of the cushion to be added.
Decimals!
3. Right Side
(rectangle defaults) (?)
2 Decimals!
4. Bottom Side
(rectangle defaults) (?)
The bottom width of the cushion to be added.
2 Decimals!
5. Diagonal
(rectangle defaults) (?)
This diagonal is critical to the angles at the four corners. Measure it carefully from lower left corner to upper right corner. The default measurement, if both sides opposite are unequal, will result in a 90 degree angle at the upper left corner. If one set of opposite sides is equal, the default diagonal will center the remaining shorter side over the longer one.
2 Decimals!
Cushion Rendition Color


Canvas not supported
Canvas not supported